IP Interfaces
This table contains the IP Interfaces in the network.
Columns
| Name | Description |
|---|---|
| Port capacity (Gbps) | The current capacity of the underlying IP port (or ports if LAG), in Gbps |
| IGP instance | The IGP (e.g. OSPF) weight applied for ECMP computations, in the default IGP instance of the AS |
| Description | A user-defined text description (potentially long) that can be assigned to this element |
| MPLS-TE enabled? | Indicates if the interface is allowed to carry MPLS-TE tunnels. |
| PIM enabled? | Indicates if the interface is enabled to transmit multicast traffic via PIM protocol |
| IGP weight | The IGP (e.g. OSPF) weight applied for ECMP computations, in the IGP where this interface is assigned, if any |
| Node | Associated node |
| Port | IP port associated |
| Attributes | User-defined attributes associated to this element |
| IP in links | The incoming IP links |
| Name | A user-defined name (typically short) that can be assigned to this element |
| MPLS-TE Admin weight | The administrative weight assigned to the interface for MPLS-TE tunnel path calculations. Used when the tunnel is configured to dynamically optimize the tunnel path using the CSPF algorithm |
| Identifier | A unique identifier set to the element, and never changed |
| IP neighbour nodes | Indicates the set of nodes that have an IP link with this interface |
| IP out links | The outgoing IP links |
| External links | Indicates if this element has one or more user-defined external URLs associated to it. If so, when the user clicks this cell, and selects the URL (if more than one), a navigator is launched and the URL page is shown. External links are not editable in the GUI, but via API. |
| IP address and mask size | Indicates the IP address |
| Rx traffic (Gbps) | The received IP traffic through this interface, in Gbps |
| Tags | User-defined tags associated to this element |
| Tx traffic (Gbps) | The transmitted IP traffic through this interface, in Gbps |
| VLAN | Indicates the VLAN this interface belongs to, if connected an IP switch |
| MPLS-TE Reservable BW | Indicates the total amount of interface bandwidth (in Gbps) that is reservable by traversing MPLS-TE tunnels. |
| JSON | An optional JSON content describing this element |
| MPLS-TE Reservable BW per tunnel | Indicates the maximum amount of interface bandwidth (in Gbps) that is reservable by EACH traversing MPLS-TE tunnels. |
| Subinterface? | Indicates if the interface is a subinterface: this means that the associated port has more than one interface defined |
Views
| Name | Columns | Description |
|---|---|---|
| Full view | Identifier, Name, Description, ExternalLinks, Node, Port, Subinterface?, IpNeighbourNodes, PimEnabled?, IpAddressAndMaskSize, Vlan, IgpInstance, IgpWeight, IpOutLinks, IpInLinks, TxTraffic(gbps), RxTraffic(gbps), PortCapacity(gbps), Mpls-teEnabled?, Mpls-teReservableBw, Mpls-teReservableBwPerTunnel, Mpls-teAdminWeight, Tags, Attributes, Json | This table view corresponds to a view with all the table columns. In some occassions, this may imply an impractically large number of columns for human inspection. |
| BGP/IGP | Identifier, Name, Node, IpAddressAndMaskSize, Vlan, IgpInstance, IgpWeight | Columns associated to BGP and/or IGP information of the node |
| Connectivity | Identifier, Name, Node, Port, Subinterface?, IpNeighbourNodes, PimEnabled?, IpAddressAndMaskSize, Vlan, IpOutLinks, IpInLinks | Columns associated to the element related paths, links, neighbor nodes and alike |
| Description & tags & attributes | Identifier, Name, Description, ExternalLinks, Node, IpAddressAndMaskSize, Vlan, Tags, Attributes, Json | Columns associated to side information like element names, descriptions, user associated tags or attributes |
| Default view | Identifier, Name, Node, IpAddressAndMaskSize, Vlan, IgpWeight, TxTraffic(gbps), RxTraffic(gbps), PortCapacity(gbps), Tags | This table view corresponds to a subset of columns selected as representative for a default table view. They typically include the most typical required values |
| KPIs | Identifier, Name, Node, IpAddressAndMaskSize, Vlan, TxTraffic(gbps), RxTraffic(gbps), PortCapacity(gbps) | Columns associated to traffic-related KPIs of the multicast flows |
| MPLS-TE | Identifier, Name, Node, IpAddressAndMaskSize, Vlan, Mpls-teEnabled?, Mpls-teReservableBw, Mpls-teReservableBwPerTunnel, Mpls-teAdminWeight | Columns associated to MPLS-TE operation or KPIs |
Table right-click menu
- Set for selected elements...: Menu with options for setting values to different parameters of the selected elements
- Value at column 'Identifier': This option sets the value at column 'Identifier'
- For selected elements: Set the value at column 'Identifier' for: Selected elements (The elements already selected by the user in the table before calling this action)
- For all table elements: Set the value at column 'Identifier' for: All table elements (All the elements in the table, not applying any filter, and not considering any pagination)
- Value at column 'Name': This option sets the value at column 'Name'
- For selected elements: Set the value at column 'Name' for: Selected elements (The elements already selected by the user in the table before calling this action)
- For all table elements: Set the value at column 'Name' for: All table elements (All the elements in the table, not applying any filter, and not considering any pagination)
- Value at column 'Description': This option sets the value at column 'Description'
- For selected elements: Set the value at column 'Description' for: Selected elements (The elements already selected by the user in the table before calling this action)
- For all table elements: Set the value at column 'Description' for: All table elements (All the elements in the table, not applying any filter, and not considering any pagination)
- Value at column 'PIM enabled?': This option sets the value at column 'PIM enabled?'
- For selected elements: Set the value at column 'PIM enabled?' for: Selected elements (The elements already selected by the user in the table before calling this action)
- For selected elements: Set the value at column 'PIM enabled?' for: All table elements (All the elements in the table, not applying any filter, and not considering any pagination)
- Value at column 'VLAN': This option sets the value at column 'VLAN'
- For selected elements: Set the value at column 'VLAN' for: Selected elements (The elements already selected by the user in the table before calling this action)
- For all table elements: Set the value at column 'VLAN' for: All table elements (All the elements in the table, not applying any filter, and not considering any pagination)
- Value at column 'MPLS-TE enabled?': This option sets the value at column 'MPLS-TE enabled?'
- For selected elements: Set the value at column 'MPLS-TE enabled?' for: Selected elements (The elements already selected by the user in the table before calling this action)
- For selected elements: Set the value at column 'MPLS-TE enabled?' for: All table elements (All the elements in the table, not applying any filter, and not considering any pagination)
- MPLS-TE reservable bandwidth (Gbps): This option sets the value at column 'MPLS-TE Reservable BW'
- For selected elements: Set the value at column 'MPLS-TE Reservable BW' for: Selected elements (The elements already selected by the user in the table before calling this action)
- For all table elements: Set the value at column 'MPLS-TE Reservable BW' for: All table elements (All the elements in the table, not applying any filter, and not considering any pagination)
- MPLS-TE reservable bandwidth per tunnel (Gbps): This option sets the value at column 'MPLS-TE Reservable BW per tunnel'
- For selected elements: Set the value at column 'MPLS-TE Reservable BW per tunnel' for: Selected elements (The elements already selected by the user in the table before calling this action)
- For all table elements: Set the value at column 'MPLS-TE Reservable BW per tunnel' for: All table elements (All the elements in the table, not applying any filter, and not considering any pagination)
- Value at column 'MPLS-TE Admin weight': This option sets the value at column 'MPLS-TE Admin weight'
- For selected elements: Set the value at column 'MPLS-TE Admin weight' for: Selected elements (The elements already selected by the user in the table before calling this action)
- For all table elements: Set the value at column 'MPLS-TE Admin weight' for: All table elements (All the elements in the table, not applying any filter, and not considering any pagination)
- Add unnumbered IP interface/s: Adds an IP interface to tagged IP ports
- Remove: Different remove options
- Selected elements: Remove elements: Selected elements (The elements already selected by the user in the table before calling this action)
- All table elements: Remove elements: All table elements (All the elements in the table, not applying any filter, and not considering any pagination)
- Register in IGP: Register the selected IP interfaces in an IGP
- Tags: Different menu options related to user-defined tags
- Add tag: Adds a user-defined tag to the indicated elements
- Remove tag: Removes a user-defined tag from the indicated elements
- Remove all tags: For all the indicated elements, all their tags are removed
- Attributes: Different menu options related to user-defined attributes
- Add attribute: Adds a user-defined attribute (key-value pair) to all the selected elements. Any attribute with the same key is replaced by the new value.
- Remove attribute: Removes a user-defined attribute (key-value pair) from all the selected elements.
- Remove all attributes: Removes all the user-defined attributes (key-value pair) from the indicated elements.